Base Curve : 6.90mm, 7.10mm to 8.30mm (0.10mm incr.) (14 lenses)

Diameter : 14.3mm

Power : Varies with base curve (plano to -6.00D)

Edge : Standard

Center thickness : 0.28mm

Conditioning trial lenses before each use

Trial lenses are stored dry in their respective cases. Before each use it is imperative that you clean and condition each lens thoroughly. To clean, apply a few drops of an approved GP lens cleaner on both surfaces and gently rub the lenses between your fingers or in the palm of your hand for 10 to 15 seconds. Rinse off the cleaner with saline and proceed with conditioning. To condition, use the same method as cleaning, apply a few drops of an approved GP conditioning solution and rub each lens for 15 to 20 seconds. Rinse lens with non-preserved saline solution. The trial lens is now ready for use.

NOTE: Diagnostics lenses are laser marked with V14 followed by the base curve value. For example a lens with a base curve value of 7.80mm would be laser marked as follows: V14 780.